Simple, step-by-step ways to track your Nano X’s battery
Check Battery Level Directly on the Ledger Nano X Device
To start, the most straightforward way to check your Nano X’s battery is right on the device itself. First, confirm the device has enough charge to turn on—if it’s fully dead, you won’t see anything. Press both the left and right buttons at the same time to wake up the screen. Once the main interface loads, look for the small battery icon in the top right corner; next to it, you’ll see a percentage number showing the current battery level. For example, last week when I was heading to a crypto meetup, I checked my Nano X before leaving and saw it had 88% battery left, so I didn’t need to grab my charging cable. Keep an eye out for warning signs: if the battery is below 20%, the icon turns yellow, and below 10%, it flashes red, meaning you should plug it in soon to avoid unexpected shutdowns.
Use Ledger Live Desktop App for Real-Time Battery Stats
If you prefer a more detailed view, the Ledger Live desktop app gives precise battery data that’s often more accurate than the device’s on-screen reading. First, connect your Nano X to your computer via the included USB-C cable, then unlock the device by entering your PIN. Open Ledger Live on your desktop, and wait for it to recognize the device. Once connected, click the “Settings” icon in the left sidebar, then select “Device” from the menu. Here, you’ll find a dedicated battery section showing both current percentage and estimated time remaining based on recent usage. Last month, when I planned a long road trip where I’d use my Nano X for small transactions, I checked the desktop app and saw it had 52% battery left—this let me decide to charge it halfway through the trip instead of risking a dead device mid-journey.
Monitor Battery on Ledger Live Mobile App
For on-the-go checks, the Ledger Live mobile app is perfect, especially if you don’t have your computer handy. First, make sure Bluetooth is enabled on your smartphone, then open the Ledger Live app. Tap the “Accounts” tab, then look for the device icon in the top right corner—tap it to access device settings. From there, select “Device settings” and scroll down to find the battery level section. This is super useful when you’re out: last weekend I was working from a coffee shop and my Nano X was paired with my phone. When I checked the mobile app, I saw the battery was at 17%, so I quickly found a nearby outlet to charge it before it died while sending a small crypto transaction. The mobile app also shows real-time charging status, so you can confirm when it’s topped up.
Troubleshooting Inaccurate Battery Readings
Sometimes, you might notice the battery reading is off—like it says 60% but the device dies an hour later. This is usually fixable with quick steps. First, ensure your Nano X runs the latest firmware; outdated software can cause battery tracking glitches, which you can update via Ledger Live desktop or mobile. Another common fix is to restart your Nano X: hold both buttons until the device turns off, then turn it back on. I had this issue a few months ago: my device showed 85% battery but shut down unexpectedly when trying to send a transaction. I updated the firmware and restarted it, and readings were accurate afterward. If the problem persists, unpair and re-pair Bluetooth (for mobile) or re-plug the USB cable (for desktop). Most issues resolve with these steps, so you won’t need to reach out to support right away.
